Decarburization and Your Precision Machine Shop

March 17, 2017

Decarburization on surface layers can affect heat treatment and hardness attained on parts. Decarburization also provides evidence of where in a process a defect or imperfection occurred.

Most defects  in steel workpieces encountered in our precision machine shops are longitudinal in nature. While their presence alone is enough to concern us, for the purposes of corrective action, it becomes important to identify where in the process the longitudinal imperfection first occurred. Visual examination alone is not enough to confirm the source. Did it occur prior to rolling? During rolling? After rolling? Understanding decarburization and how it presents in a sample can help us to identify where and when  in the process the imperfection first occurred.

The question that we want to answer as part of our investigation is usually “When in the process did the defect first occur?” Looking at decarburization and any subscale present can help us answer that question with authority.

What is Decarburization?

The light area (ferrite) surrounding the dark intrusion is decarburization. note the lack of pearlite in this decarburized (lighter) zone. There is no evidence of scale, indicating that this defect was created during, rather than prior to rolling.

“Decarburization is the loss of carbon from a surface layer of a carbon containing alloy  due to reaction with one or more chemical substances in a medium that contacts the surface.”Metals Handbook Desk Edition

The carbon and alloy steels that we machine contain carbon. In the photo above, the carbon is contained in the pearlite (darker) grains. The white grains are ferrite. In an etched sample, decarburization surrounding a defect is identified as a layer of ferrite with very little, or none of the darker  pearlitic structure typically seen in the balance of the material. The black intrusion in the photo above is the mount material that has filled in the crevice of the seam defect.

What is Subscale?

The grey material adjacent to defect within the white decarburized area is subscale. This subscale is evidence that the crack was present on the bloom prior to reheat for rolling

Subscale is a reaction product of Oxygen from the atmosphere with various alloying elements as a result of time at high temperatures. The presence or absence of the subscale is the indicator that helps us to pinpoint the origin of the defect. For a subscale to be present,  the time at temperature must be sufficient for oxygen to diffuse  and react with the material within the defect. According to Felice and Repp, 2250 degrees F and fifteen minutes  is necessary to develop an identifiable subscale. Lower temperatures would require longer times. Typically rolling mill reheat cycles offer plenty of time to develop a subscale in a prior existing defect. However, for defects that are created during rolling, the limited time at temperature and the decreasing temperatures on cooling make formation of subscales unlikely.

Reading Decarb and Subscale to Understand the Defect

Decarburization is time and temperature dependent. This means that its relative depth and severity are clues as to time at temperature, though interpretation requires experience and understanding of the differences in appearance from grade to grade based on Carbon content.

Symmetrical Decarburization

If the decarburization is symmetrical this is an indication that the defect was present in billet or bloom prior to reheat and rolling. oxygen in the high temperature atmosphere of the reheat furnace depletes the carbon equally from both sides of the pre-existing defect.

Asymmetrical Decarburization

Decarburization that is obviously asymmetrical indicates that the defect is mechanical in nature and was induced some time  during the hot rolling process.

Ferrite Fingers

Unetched specimen of seam (top). Etched specimen showing “ferrite finger.” (Bottom)

Ferrite fingers are a surface quality problem that is associated with longitudinal bar defects. During reheat, a defect in the bllom or billet is exposed to high temperature atmosphere, forming decarburization and subscale  around the defect. Rolling partially closes or “welds shut” the crack. However, a trail of of subscale is entrained in a  formation of almost pure ferrite which has been depleted of pearlite, carbon and alloy by the reaction at elevated temperature.   This trapped scale remains a potential oxygen source, driving further internal oxidation and decarburization if temperatures remain high.

Continuous improvement requires  taking root cause corrective action. Obviously identifying the root cause is critical. When we encounter longitudinal linear defects in our steel products, using a micro to characterize the nature of the decarburization and presence or absence of sub scale or ferrite fingers are important evidence as to when, where, and how in the process the defect originated.

 

 

 

Advertisements